Category: Controller Setup and Operation

FrameOverlayWatch the First "Staging" Video

We start off with another example of swapping equipment on Link4's iPonic 614 controller. Here the default Irrigation Pump on output three is changed into an AC unit. This brings us to the concept of "staging" equipment. (part 1 of 2)

Category: Controller Setup and Operation

FrameOverlayWatch the Startup Wizard Instructional Video

This video walks you through Link4's hydroponic controller - the iPonic 614's Startup Wizard. There are 4 easy steps to complete before you can let the controller go on its own.

Category: Controller Setup and Operation

FrameOverlayLearn the concepts of a "Setpoint" from Link4

This videos explains "Setpoints," a very important concept for the iPonic 614 controller. Setpoints are the target parameters for temperature, humidity, CO2, and light timer on all controllers from Link4 Corporation.

Category: Controller Setup and Operation

FrameOverlayWatch the Second iPonic 614 Installation Video

This video walks you through the process of installing and mounting the iPonic 614 from Link4 Corporation. (part 2 of 2)

Category: Controller Setup and Operation

FrameOverlayWatch how to Swap Equipment Types

This instructional video Walks you through an example of how to change one of the iPonic 614's standard default equipment settings to different one. In the example, the output #4 defaults to a Dehumidifer & the example shows how you can change it into a Humidifier.

Category: Controller Setup and Operation

FrameOverlayWatch the First iPonic 614 Installation Video

This video walks you through the process of installing and mounting the iPonic 614 from Link4 Corporation. (part 1 of 2)

Category: Controller Setup and Operation

FrameOverlayWatch the Front Panel Overview

An overview of Link4's iPonic 614 hydroponic controller. This video provides a virtual tour of the front panel and the navigational keys as well as some hardware switches.